Mic Test

Check audio clarity, live input decibel levels, record and playback — with zero software installation and 100% client-side privacy.

● WEBRTC AUDIO CAPTURE // MICROPHONE TEST READY

  No device captured yet

Click start, allow microphone access in your browser, and speak normally.

A zero-install WebRTC microphone diagnostic utility. Instantly inspect audio capture hardware, visualize live input levels via an HTML5 AudioContext analyzer, verify clear frequency response with a 5-second local loopback recording, and troubleshoot common OS permission and gain misconfigurations.

How to Use This Test

  1. Click 'Start mic test' and grant microphone permission when prompted by your browser.
  2. Speak at your standard conversational volume while watching the input meter.
  3. Observe the live visual meter — healthy speech should bounce comfortably into the 50%–80% range.
  4. Click 'Record 5s' to capture a brief sample, then press 'Play back' to inspect background noise and vocal clarity.
  5. Click 'Stop test' to terminate hardware access and release the audio device.

Comprehensive Audio Troubleshooting Blueprint

Audio capture failures in modern operating systems stem from a layered signal chain: hardware transduction → USB audio interface controller → OS kernel driver → system privacy gatekeeper → browser sandboxing. A failure at any point silences the entire chain.

Operating System Diagnostic Checklist

  1. Windows 11 Privacy Permissions: Open Settings → Privacy & security → Microphone. Verify that both 'Microphone access' and 'Let apps access your microphone' are toggled ON. Scroll down and verify 'Let desktop apps access your microphone' is also enabled.
  2. Hardware Mute Switches: Inspect your headset cable for an inline slider, or your microphone body for a capacitive touch mute ring. Many studio mics feature an LED ring that glows red when hardware-muted.
  3. Exclusive Mode Lockouts: In Windows, search mmsys.cpl (Sound Control Panel), select your microphone → Properties → Advanced. Uncheck 'Allow applications to take exclusive control of this device'. This prevents apps like Zoom or DAW software from monopolizing the driver.
  4. macOS Security Sandbox: Open System Settings → Privacy & Security → Microphone. Ensure your current browser (Chrome, Safari, Firefox, Arc) has its toggle switched ON. If grayed out, launch terminal and execute tccutil reset Microphone to reset audio permissions.

Frequently Asked Questions

Why does my microphone say 'NotFoundError' or 'NotAllowedError'?

'NotFoundError' indicates no physical or virtual audio capture device is detected by your OS. 'NotAllowedError' means either your browser or OS privacy settings have blocked microphone access.

Does this mic test send my voice to a remote server?

No. The audio stream is connected directly to your browser's local AudioContext. Test recordings are stored purely as a temporary in-memory Blob and are purged when you leave or refresh the page.

Why does my mic volume bar barely move when I speak loudly?

Your operating system input gain or physical hardware gain is set too low. In Windows, navigate to Sound Settings → Input Properties and increase the Volume slider to 80-90. On external USB mics (like Blue Yeti or Shure MV7), check the physical gain dial on the back.

What causes a constant humming, buzzing, or hiss in test playback?

Electrical ground loop noise, poor USB shielding, or excessive digital gain boost. Disconnect your laptop charger to test for ground loops, avoid unpowered USB hubs, and disable 'Microphone Boost' in Windows Control Panel.

How do I test a specific microphone if I have multiple connected?

Browsers automatically request your operating system's default communications device. To test a secondary headset or studio condenser, set it as the default input device in Windows/macOS sound settings and reload this page.

Why does my voice sound robotic or muffled?

Check if multiple noise-cancellation suites are running concurrently (e.g. Windows Audio Enhancements + Realtek AI + Discord Krisp). Stacking multiple algorithms creates phase cancellation and robotic artifacts.